1 、 installation environment, 2 、 transport and handling, Notice – WansView NCH 537MW User Manual
Page 2: Statement

http://www.wansview.com
2
If the user manual can not help you to solve the problem, please call our technology center about the solutions. We will
update the content for the new functions without notice.
1、 Installation Environment
Keep away from the places for high-temperature, heat source and direct sunlight;
Keep away from water and when get wet, cut off the power immediately.
Avoid to use in damp environment, the reference range for operation humidity is below 85%RH
Avoid to use in overheating and too cold environment, the reference range for operation temperature is -10℃~
+50℃.
Please install horizontally or wall mounting, avoid to strenuous vibration and not put other equipments onto the
item.
2、 Transport and Handling
The package is well-designed to ensure the security during the delivery, so please do not change the package at
random.
Do not move the ip cameras from overheated to supercooled condition frequently, otherwise it will frost and
shorten the service life.
Do not move the item when is power on, otherwise the main board might be damaged.
Notice:
1.
Please check the power supply before it is working
2.
Be careful not to bang the camera or subject it to strong impacts or shocks..
3.
Do not directly touch the optical components for the image sensor, if necessary, pl ease place a clean and
moistened cloth with alcohol and wipe the dirt gently; When not in use, please place the dust cover on to the item
to protect the image sensor.
4.
Do not aim the camera directly into the sun or at other intense light sources that could affect the image quality (it is
not the problem for the ip camera), also shorten the service life for the image sensor.
5.
Keep away from laser when it is working, otherwise the image sensor can be damage.
6.
If the equipment is not working properly, please contact the store or the service center, do not disassemble or
modify the equipment in any way. (Problems caused by unauthorized modification or repair should be at your
own risk.)
Statement
Notice