Alarm time setting – WansView NCH 537MW User Manual
Page 16

http://www.wansview.com
16
ways, for example, store in SD/TF, or upload to FTP, or email you, etc. example of figure 18.
Figure 18
Note: Please insert the SD/TF Card and tick
the “Save Video on the SD card” , “Save video on the FTP
server” will take effect.
3.4.4. Alarm time setting
Figure 19
The device will trigger the alarm only during the scheduled time period, you can select the scheduled
time according to your request.
Note: Please make sure your system time is correct before you set the alarm time period. Please refer
to chapter 3.6.2 to set system time.
This manual is related to the following products: