Vestil PM5-TG Foot Guard - Manual

rev. 1/16/2013 PM5-TG, manual
Copyright 2013 Vestil Manufacturing Corp. Page 1 of 5
PM5-TG U
NIVERSAL
P
ALLET
F
OOT
G
UARD
I
NSTRUCTION
M
ANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the
product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on labels affixed to the product.
Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
3) Although this product works on most pallet trucks, it does not fit every model.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: [email protected]
Table of Contents
Hazard identification: explanation of signal words…………………………………………………………………… 2
Safety Guidelines……………………………………………………………………………………………………….. 2
Exploded parts diagram………………………………………………………………………………………………… 3
Bill of materials…………………………………………………………………………………………………………... 3
Maintenance……………………………………………………………………………………………………………... 3
Installation ……………………………………………………………………………………………………………….. 4
Limited warranty…………………………………………………………………………………………………………. 5