TREND TB_TC - Manual (Page 2)

TB/TC Installation Instructions
TB/TC Thermistor Contact Temperature Sensor Installation Instructions TG200726 Issue 1/C 21/05/07 2
Mount on Wall
Installation (continued)
3
a b
85 mm (3.35”)
Mount Probe
4
either use jubilee clip (provided)
or use cable tie(s) (not provided)
recommended use of thermally conductive paste
Remove Lid 5
a
b
Insert Cable
6
either use M20 flexible conduit or M16 cable gland
Drill 2 pilot holes Tighten 2 screws
2 off No 6 (M3.5) screws