Weee directive, T/fg installation instructions, Installation – TREND T_FG User Manual
Page 4: Disposal

T/FG
Installation Instructions
T/FG Flue Gas Temperature Sensor Installation Instructions TG100245A Issue 2/C 13/03/07
4
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route
du Bois 37,Switzerland by its Authorized Representative.
Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof
without obligation to notify any person of such revisions or changes.
Trend Control Systems Limited
P.O. Box 34, Horsham, West Sussex, RH12 2YF, UK. Tel:+44 (0)1403 21888 Fax:+44 (0)1403 241608 www.trend-controls.com
Trend Control Systems USA
6670 185th Avenue NE, Redmond, Washington 98052, USA. Tel: (425)897-3900, Fax: (425)869-8445 www.trend-controls.com
WEEE Directive :
At the end of their useful life the
packaging and product should
be disposed of by a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.
INSTALLATION
(continued)
IQ
Replace lid
10
a
b
Configure IQ
11
IQ Configuration
Manual 90-1533
IQ
or
Set up IQ Sensor type
12
Test System
13
Δ
T
IQ
It is recommended to use SET (Software Tool) for the setting of the sensor type module. For all
IQ2 series controllers with firmware version 2.1 or geater, or IQ3 series controllers use the following
SET Unique Sensor Reference:
PRT I
0+400 (°C)
DISPOSAL
Alternatively, and for fahrenheit
scaling, enter scaling manually as
defined in the adjacent table with
scaling mode 5 (characterise). For all
other IQ controllers see the Sensor
Scaling Reference Card TB100521A.
s
t
i
n
U
Y
E
U
L
P
I1
I2
O1
O2
C
°
2
4
0
0
4
0
2
4
0
2
0
0
0
4
F
°
2
4
2
5
7
2
3
2
4
0
2
2
3
2
5
7