Teledyne LeCroy QPHY-LPDDR2 - Manual (Page 24)

24
QPHY-LPDDR2-OM-G Rev B
Probes are connected electrically in a single-ended arrangement: the positive (+) side of the probe must
be connected to the signal trace, while the negative (-) side is connected to the ground plane.
Figure 15. Differential probe properly connected to the fixture (Solder-In configuration)
Probe Calibration Menu
The probe calibration menu can be accessed from the Vertical drop-down menu or from the channel
dialog:
Figure 16. Accessing the probe calibration menu