Teledyne LeCroy UWBTracer Verification Script Engine Manual - Manual (Page 44)

LeCroy Corporation Verification Script Engine Manual, version 2.2
9.19 SendAggDataFrames()
This function specifies more precise tuning for Aggregated Data frames.
Format: SendAggDataFrames(dest_id, src_id, subtype)
Parameters:
dest_id This parameter specifies that only Aggregated Data frames containing Destination Id
with the same value are sent. (The value_ANY means any Destination Id is accepted.)
src_id
This parameter specifies that only Aggregated Data frames containing Source Id with
the same value are sent. (The value_ANY means any Source Id is accepted.)
sub_type This parameter specifies that only Aggregated Data frames having SubType field with
the same value are sent. (The value_ANY means any SubType is accepted.)
Example:
# Send any Aggregated Data frames.
SendAggDataFrames();
# Send Aggregated Data frames having Destination Id 0xBEEF.
SendAggDataFrames (0xBEEF);
# Send Aggregated Data frames having Destination Id = 0xBEEF and
# Source Id = 0xAABB.
SendAggDataFrames (0xBEEF, 0xAABB);
# Send Data Aggregated frames having Frame SubType = 14.
SendAggDataFrames (_ANY, _ANY, 14);
Page 44 of 95