Verification script engine output context members, 6verification script engine output context members – Teledyne LeCroy UWBTracer Verification Script Engine Manual User Manual
Page 23
LeCroy Corporation
Verification Script Engine Manual, version 2.2
6
Verification Script Engine Output Context Members
All verification scripts have output contexts, special structures that can be used inside of the application.
The scripts fill their members. (For more information about output contexts, see the LeCroy PSG Script
Language(CSL) Manual.) The verification script output contexts have only one member:
out.Result
: Result of the whole verification program defined in the verification script.
This member can have three values:
• _VERIFICATION_PROGRESS: Set by default when a script starts running.
• _VERIFICATION_PASSED
• _VERIFICATION_FAILED
The last two values should be set if you decide that a recorded trace does (or does not) satisfy the imposed
verification conditions. In both cases, the verification script stops running.
If you don't specify any of those values, the result of script execution is set to VERIFICATION_FAILED at exit.
Note: If you don’t care about the result of script running, call the function
once before
stopping the script. The result is DONE.
Page 23 of 95