Teledyne LeCroy UWBTracer Verification Script Engine Manual - Manual (Page 42)

LeCroy Corporation Verification Script Engine Manual, version 2.2
9.17 SendCommandFrames()
This function specifies more precise tuning for Command frames.
Format: SendCommandFrames(dest_id, src_id, subtype)
Parameters:
dest_id This parameter specifies that only Command frames containing Destination Id with the
same value are sent. (The value_ANY means any Destination Id is accepted.)
src_id
This parameter specifies that only Command frames containing Source Id with the
same value are sent. (The value_ANY means any Source Id is accepted.)
sub_type This parameter specifies that only Command frames having SubType field with the
same value are sent. (The value_ANY means any SubType is accepted.)
Example:
# Send any Command frames.
SendCommandFrames();
# Send Command frames having Destination Id 0xBEEF.
SendCommandFrames (0xBEEF);
# Send Command frames having Destination Id = 0xBEEF and Source Id = 0xAABB.
SendCommandFrames (0xBEEF, 0xAABB);
# Send Command frames having Frame SubType = 14.
SendCommandFrames (_ANY, _ANY, 14);
Page 42 of 95