Teledyne LeCroy UWBTracer Verification Script Engine Manual - Manual (Page 31)

LeCroy Corporation Verification Script Engine Manual, version 2.2
9.6 DontSendChannel()
This function specifies that events occuring on a specified channel should NOT be sent to the script.
Format:
DontSendChannel (channel)
Parameters:
channel This parameter can be one of following values:
_MPI (= 1): DO NOT send events from MPI channel
_RF (= 2): DO NOT send events from RF channel
_MPI_DEC (= 3): DO NOT send events from MPI decrypted channel
_RF_DEC (= 4): DO NOT send events from RF decrypted channel
_CHANNEL_1 (= 1): DO NOT send events from channel 1 (MPI)
_CHANNEL_2 (= 2): DO NOT send events from channel 2 (RF)
_CHANNEL_3 (= 3): DO NOT send events from channel 3 (MPI decrypted)
_CHANNEL_4 (= 4): DO NOT send events from channel 4 (RF decrypted)
Example:
DontSendChannel(_RF); # DO NOT send events from RF channel.
DontSendChannel(_MPI_DEC); # DO NOT send events from MPI decrypted channel.
…
DontSendChannel(_CHANNEL_2); # DO NOT send events from channel 2 (RF).
DontSendChannel(_CHANNEL_3); # DO NOT send events from channel 3.
# (MPI_DEC)
…
DontSendChannel(2); # DO NOT send events from channel 2 (RF).
DontSendChannel(3); # DO NOT send events from channel 3 (MPI_DEC).
…
Page 31 of 95