Teledyne LeCroy Conquest API Manual - API Manual - Manual (Page 45)

API Errors
Error codes are in the SBAEAPIErrors.h file. They are returned by some functions upon an
error condition.
IDE_NO_ERROR 0
IDE_INVALID_PORT_NO 1
IDE_ERROR_IN_DETECTING_HW 2
IDE_ERROR_HW_NOT_FOUND 3
IDE_CAN_NOT_OPEN_FILE 4
IDE_CAN_NOT_SAVE_FILE 5
IDE_TA_HS_TRIG_ON_SE1 6
IDE_HW_IS_BUSY 7
IDE_EXERCISER_PROGRAM_ERROR 8
IDE_SYSTEM_DATA_IS_CORRUPTED 9
IDE_CANNOT_RUN_PROJECT 10
IDE_NOT_AUTHORIZED_TA_SPEED 11
IDE_IS_NOT_ABLE_TO_SAVE 12
IDE_HW_IS_NOT_STOPPED 13
IDE_BAD_DATA_ENTRY 14
IDE_HIGH_SPEED_TEST_MODE_IN_FULL_LOW 15
IDE_NON_STD_CLOCK_IN_NO_FULL_LOW_SPEED 16
IDE_TIMMING_TRIG_WHEN_TA_ISNOT_ENABLE 17
IDE_NO_MATCH_TRIG_ITEM_WITH_ANALYZER_SPEED 18
IDE_NO_MATCH_CAP_ITEM_WITH_ANALYZER_SPEED 19
IDE_NO_MATCH_TRIG_CAPTURE_ITEMS_SPEED 20
IDE_NO_MATCH_EXCLUDE_NYET_WITH_ANALYZER_SPEED 21
IDE_NO_MATCH_EXCLUDE_KEEPALIVE_WITH_ANALYZER_SPEED 22
DE_NO_MATCH_EXCLUDE_KEEPALIVE_WITH_TRIG_OR_CAP_ITEMS_SPEED 23
IDE_NO_MATCH_EXCLUDE_NYET_WITH_TRIG_OR_CAP_ITEMS_SPEED 24
IDE_NO_MATCH_EXCLUDE_NAK_WITH_TRIG_ITEMS 25
IDE_NO_MATCH_EXCLUDE_NYET_WITH_TRIG_ITEMS 26
IDE_NO_MATCH_EXCLUDE_SOF_OR_KEEP_ALIVE_WITH_CAP_ITEMS 27
IDE_NO_MATCH_CAPTURE_ITEM0_WITH_OTHERS 28
IDE_CANNOT_FILL_CAPTURE_ITEM3_WHEN_CAPTURE_ITEM2_IS_NONE 29
IDE_CANNOT_SELECT_MORE_THAN_TWO_SPLIT 30
IDE_CANNOT_FILL_CAPTURE_ITEM3_WHEN_SELECT_SPLIT 31
IDE_FULL_LOW_SPEED_NOT_AUTHORIZED 32
IDE_HIGH_SPEED_NOT_AUTHORIZED 33
IDE_TA_FULL_LOW_SPEED_NOT_AUTHORIZED 34
IDE_TA_HIGH_SPEED_NOT_AUTHORIZED 35
IDE_SECOND_PORT_NOT_AUTHORIZED 36
IDE_EXTERNAL_CLOCK_NOT_AUTHORIZED 37
IDE_CANNOT_FIND_DEVICE 38
IDE_CANNOT_READ_DESCRIPTORS 39
IDE_ISNOT_MEMORY_ENOUGH 40
IDE_IS_SET_PORT_BEFORE 41
IDE_EXR_USE_HUB_COMMAND_FOR_NON_HUB_DEVICE 42