Teledyne LeCroy Conquest API Manual - API Manual - Manual (Page 17)

CaptureAndTrigger
11
CaptureAndTrigger
This interface sets the Easy Capture Project parameters (for example, Trigger point and
capture data). (This is equivalent to Data Capture And Trigger page in Easy capture project in
the software).
When you instantiate the IEsbEasyDataCapturePrj interface, the ICaptureAndTrigger
interface instantiates automatically in IEsbEasyDataCapturePrj.
You can get ICaptureAndTrigger interface from IEsbEasyDataCapturePrj by calling the
IEsbEasyDataCapturePrj ::GetCaptureAndTrigger method.
Method Description
SetTriggerType Set trigger type.
GetTriggerType Get trigger type.
SetManualTrig Set trigger manually.
IsSetManualTrig Is set to trigger manually?
SetTriggerDeviceAddress Set trigger device address.
GetTriggerDeviceAddress Get trigger device address.
SetTriggerEndPoint Set trigger endpoint.
GetTriggerEndPoint Get trigger endpoint.
SetTriggerDataPacket Set trigger data packet type.
GetTriggerDataPacket Get trigger data packet type.
SetDataCapture1 Set data capture item 1.
GetDataCapture1 Get data capture item 1.
SetDataCapture2 Set data capture item 2.
GetDataCapture2 Get data capture item 2.
SetDataCapture3 Set data capture item 3.
GetDataCapture3 Get data capture item 3.
ExcludeNakedTransactions Exclude NAK’ed transactions from capturing.
IsExcludeNakTransactions Are NAK’ed transactions excludedfrom capturing?
ExcludeNYETedTransactions Exclude NYET’ed transactions from capturing.
IsExcludeNYETedTransactions Are NYET’ed transactions excluded from capturing?
ExcludeKeepAliveEvents Exclude Keep Alive events from capturing.
IsExcludeKeepAliveEvents Is exclude Keep Alive events from capturing