Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 91)

91
Appendix C – SCSI Commands
See the include file “VS_SCSICommands.inc“ in the ..\SASVFScripts or ..\SATAVFScripts subfolder of the
main SAS Protocol Suite or SATA Protocol Suite folder for defined constants for use in scripts.
Note: This file needs to be included in the VSE Script to be able to use the defined constants.
Note: The SCSI commands listed below are defined with the following prefix SCSI_CMD_ (e.g.
SBC_FORMAT_UNIT would be SCSI_CMD_ SBC_FORMAT_UNIT)
//SBC
SBC_FORMAT_UNIT
= 0x04
SBC_LOCK_UNLOCK_CACHE10 = 0x36
SBC_LOCK_UNLOCK_CACHE16 = 0x92
SBC_PRE_FETCH10 = 0x34
SBC_PRE_FETCH16 = 0x90
SBC_READ6 = 0x08
SBC_READ10 = 0x28
SBC_READ12 = 0xA8
SBC_READ16 = 0x88
SBC_READ_CAPACITY10 = 0x25
SBC_9E = 0x9E
SBC_READ_DEFECT_DATA10 = 0x37
SBC_READ_DEFECT_DATA12 = 0xB7
SBC_READ_LONG = 0x3E
SBC_REASSIGN_BLOCKS = 0x07
SBC_REBUILD16 = 0x81
SBC_7F = 0x7F
SBC_REGENERATE16 = 0x82
SBC_REZERO_UNIT = 0x01
SBC_SEEK6 = 0x0B
SBC_SEEK10 = 0x2B
SBC_SET_LIMITS10 = 0x33
SBC_SET_LIMITS12 = 0xB3
SBC_START_STOP_UNIT = 0x1B
SBC_SYNCHRONIZE_CACHE10 = 0x35
SBC_SYNCHRONIZE_CACHE16 = 0x91
SBC_VERIFY10 = 0x2F
SBC_VERIFY12 = 0xAF
SBC_VERIFY16 = 0x8F
SBC_WRITE6 = 0x0A
SBC_WRITE10 = 0x2A
SBC_WRITE12 = 0xAA
SBC_WRITE16 = 0x8A
SBC_WRITE_AND_VERIFY10 = 0x2E
SBC_WRITE_AND_VERIFY12 = 0xAE
SBC_WRITE_AND_VERIFY16 = 0x8E
SBC_WRITE_LONG = 0x3F
SBC_WRITE_SAME10 = 0x41
SBC_WRITE_SAME16 = 0x93
SBC_XDREAD10 = 0x52
SBC_XDWRITE10 = 0x50
SBC_XDWRITEREAD10 = 0x53
SBC_XDWRITEEXTENDED16 = 0x80
SBC_XPWRITE10 = 0x51
SBC_ERASE10 = 0x2C