Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 17)

17
5.2 Trace Event-dependent Set of Members
This set of members is defined and can be used only for a specific events or after calling some
functions filling out some of the variables:
Note: As a general rule for all fields' value, if the field length is less than or equal to 4 bytes (32
bits), it is returned as an integer value, but if it is larger than 4 bytes, it is returned as raw
data type.
For example:
- In.CRC: 4-Byte value returned as an Integer.
- in.Lnk_SourceSASAddress: 8-Byte value returned as a Raw Data.
To format raw to to string, please see FormatRawBytes(RawBytes)
5.2.1 Primitives
in.Primitive 4-byte value of the Primitive
in.PrimCode Primitive Code (refer to Appendix A )
in.PrimCount Primitive count
5.2.2 OOB
in.OOBType OOB Types are defined as:
SAS_OOB_COMWAKE
SAS_OOB_COMRESET
SAS_OOB_COMSAS
SAS_OOB_KEEP_ALIVE_ACTIVITY
in.OOBBurstIdleList List of pairs (, ),
where is 0 for idle and 1 for burst. For example:
oob_burst_idle_list = in.OOBBurstIdleList;
for ( i = 0; i < sizeof( oob_burst_idle_list ); i++ )
{
oob_burst_idle = oob_burst_idle_list[ i ];
report += repIndent;
select
{
oob_burst_idle[ 0 ] == SAS_OOB_ELEMENTTYPE_IDLE :
report += Format( "OOBIdle : %ld oobi\n", i, oob_burst_idle[ 1 ] );
oob_burst_idle[ 0 ] == SAS_OOB_ELEMENTTYPE_BURST :
report += Format( "OOBBurst : %ld oobi\n", i, oob_burst_idle[ 1 ] );
};
}