Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 45)

45
Example
…
SendSSPTransport (SSP_FRAME_TYPE_XFER_RDY);
SendSSPTransport (SSP_FRAME_TYPE_XFER_RDY, “NumOfFillBytes”, 0);
SendSSPTransport (SSP_FRAME_TYPE_XFER_RDY, “”, 0,
‘5000C500001047B5’);
NexusInfo = ['5000C500001047B5', '5000E85000000001’, 10];
# Or any other possible combinations of the Nexus Info
SendSSPTransport (SSP_FRAME_TYPE_XFER_RDY, “”, 0, NexusInfo);
9.21 SendSTPTransport()
This function specifies to send a selected STP Transport event to the script.
Format :
SendSTPTransport( Frame Type);
SendSTPTransport( Frame Type, Field Name, Field Value, Nexus Info);
Parameters
Frame Type
Frame type of the STP Transport event:
_ANY
STP_FIS_TYPE_REG_H2D
STP_FIS_TYPE_REG_D2H
STP_FIS_TYPE_DEV_BITS
STP_FIS_TYPE_DMA_ACTIVATE
STP_FIS_TYPE_DMA_SETUP
STP_FIS_TYPE_BIST_ACTIVATE
STP_FIS_TYPE_PIO_SETUP
STP_FIS_TYPE_DATA
STP_FIS_TYPE_VENDOR
Field Name Refer to SendSSPTransport () .
Field Value Refer to SendSSPTransport () .
Nexus Info
Refer to SendSSPTransport () .
Example
…
SendSTPTransport (STP_FIS_TYPE_DATA);
SendSTPTransport (STP_FIS_TYPE_DATA, “”, 0, ‘5000C500001047B5’);
NexusInfo = ['5000C500001047B5', '5000E85000000001’, 10];
# Or any other possible combinations of the Nexus Info
SendSTPTransport (STP_FIS_TYPE_DATA, “”, 0, NexusInfo);