Teledyne LeCroy SAS_SATA Automation API manual - Manual (Page 46)

Teledyne LeCroy SASAnalyzer Object
40 Automation API for Teledyne LeCroy SAS/SATA Protocol Suite
ISASAnalyzer:: LoadPreEmphasisSignalFile
HRESULT LoadPreEmphasisSignalFile(
[in] BSTR bstrPreEmphasisSignalFile,
[out, retval] pbRetval);
This function gets the file of pre emphasis signal and loads it to the board.
Parameters
bstrPreEmphasisSignalFile Specifies the file name of pre emphasis signal.
Return Values
True if it loads the file successfully. False if it fails.
Remarks
The Pre emphasis dialog in the SAS/SATA software gives the probability of saving the
signal settings into a file. By calling this function, you can load that file into the board
without running the SAS/SATA software.
ISASAnalyzer::SetTraceFileName
HRESULT SetTraceFileName ([in] BSTR bstrTraceFileName)
This function sets the name of next running generated trace file.
Parameters
bstrTraceFileName String providing the name of the trace file
Remarks
Calling this function sets the next running generated trace file name. If you do not call
this function, then the trace file name will be the same as the Analyzer project file name.
This function helps you create different trace files when you want to run a project several
times with different settings (such as connection speed). Before any run, call this function
to change the trace file name.
Example
VBScript:
Analyzer.SetTraceFileName("MyTrace")
If Err.Number <> 0 Then
MsgBox Err.Number & ":" & Err.Description
End If