6 go to menu, 7 search direction, 6 go to menu 6.7 search direction – Teledyne LeCroy SimPASS PE PCI Express Software User Manual User Manual
Page 37

SimPASS PE Software User Manual
Chapter 6: Searching CATC Traces
LeCroy Corporation
31
6.6 Go To Menu
The Go To menu in the Search menu provides a quick way to search for a packet based
on a simple condition. You can search for the following types of events:
•
TLP Type
•
DLLP Type
•
Ordered Set
•
Link Event
•
Traffic Class
•
DLLP Virtual Channel
•
TLP Virtual Channel
•
Direction
•
Speed
•
Link Width
•
Requester ID
•
Completer ID
•
Data Lengths
•
Errors
6.7 Search Direction
Search direction can be toggled back and forth by using the command under the Search
menu. Search Direction controls the direction of the search. Each time Search Direction
is selected, the search order is reversed. For example, if the previous search was
forward, choosing Search Direction toggles the current search to backward.
To verify the direction of a search look at the lower right corner of the screen.
Search: Bwd or Search: Fwd should appear. If a direction is not indicated, it means that
the status bar is turned off.
To turn on the Status bar, select from the menu View > Status Bar.
Keyboard shortcuts can also be used to control search direction:
•
Control-f means Search Forward.
•
Control-b means Search Backward.