Teledyne LeCroy CP500 - Manual (Page 9)

Instruction Manual
922176-00 Rev A 3
Overview
Description
The CP500 uses a combination of Hall effect and transformer technology which enables measurements
to be made on DC, AC and impulse currents. It has a 2 MHz bandwidth and is designed to measure
continuous currents up to 500 Amp.
The probe can be used with a WaveRunner, WavePro, or LC series oscilloscope with firmware 4.3.0.0 or
higher. With the ProBus interface, the CP500 becomes an integral part of the oscilloscope. The
bandwidth limit, auto zero and degauss functions are all controlled from the oscilloscope’s graphical
user interface. The oscilloscope provides power to the probe, so no external power supply is needed.
Key Features
• Highly accurate current measurements
• Easy current measurements
• Wide bandwidth
• Compact
• Over-current protected
Accessories
Certificate of Calibration
Instruction Manual CP500-OM-E