Teledyne LeCroy DXC100A - Manual (Page 4)

DXC100A Differential Probe Pair
2 922259-00 Rev A
Safety Instructions
This section contains instructions that must be observed to keep this
oscilloscope accessory operating in a correct and safe condition. You are
required to follow generally accepted safety procedures in addition to the
precautions specified in this section. The overall safety of any system
incorporating this accessory is the responsibility of the assembler of the
system.
Symbols
These symbols may appear on the probe body or in this manual to alert you to
important safety considerations.
High Voltage, risk of electric shock.
CAUTION of potential for damage to probe or instrument it is
connected to, or WARNING of potential bodily injury. Attend to the
accompanying information to protect against personal injury or
damage. Do not proceed until conditions are fully understood and
met.
ELECTROSTATIC DISCHARGE (ESD) HAZARD. Susceptible to damage if
anti-static measures are not taken.
DOUBLE INSULATION
PROTECTIVE (EARTH) TERMINAL
Precautions
Connect and disconnect properly. Connect probe to the measurement
instrument before connecting the test leads to a circuit/signal being tested.
Use only within operational environment listed. Do not use in wet or explosive
atmospheres.
Use indoors only.