Teledyne LeCroy HDO 4000 Getting Started Guide - Manual (Page 7)

923010-00 Rev A
INTRODUCTION 3
Specifications
Detailed specifications are maintained in the Datasheet on the product
page at teledynelecroy.com.
Key Specifications
Bandwidth 200 MHz – 1 GHz
Channels 2 or 4
Sample Rate (all channels) 2.5 GS/s
Memory (per channel) 12.5 Mpts/ch
Digital Channels 16
Digital Sample Rate 1.25 GS/s
Minimum Detectable Pulse Width 2 ns
Maximum Input Frequency 250 MHz
Materials List
Check that you have all the parts listed here. Contact Teledyne
LeCroy immediately if any part is missing.
• 1 oscilloscope
• 2 or 4 passive probes (one for each channel)
• 1 AC power cord (rated for country)
• 1 protective front cover
• 1 Getting Started Guide
• 1 Oscilloscope Security Certificate
• 1 Oscilloscope Registration Card
• 1 Calibration Document
HDO4000-MS models also include:
• 1 digital leadset
• 5 flying ground leads
• 20 ground extenders
• 22 XL microgrippers