Teledyne LeCroy HDO 4000 Getting Started Guide - Manual (Page 22)

923010-00 Rev A
USER INTERFACE 18
Apply up-to-eight measurement parameters.
Display a zoom of the trace.
Apply up-to-two dual operator math functions.
Copy the active trace to an internal memory
(e.g., C2 to M2).
Scale the waveform to fit the grid.
Apply a custom label to a waveform.
These buttons on the main Channel, Math, Memory and Digital dialogs
offer shortcuts to useful functions so that you don’t have to leave the
underlying dialog. They always apply to the active (highlighted) trace.
Shortcut Toolbar Language Selection
To change the language that appears on the display, go to Utilities >
Preference Setup > Preferences and make your Language selection.
The oscilloscope software must be restarted after the language is selected.
If you wish to also change the language of the Windows operating system:
1. Choose File > Minimize to hide the oscilloscope display and show the
Windows Desktop.
2. From the Windows task bar, choose Start > Control Panel >
Clock, Language and Region.
3. Under Region and Language select Change Display Language.
4. Click the Install/Uninstall Languages button.
5. Select Install Language and Browse Computer or Network.
6. Click the Browse button, navigate to D:\Lang Packs\ and select the
language you want to install. The available languages are: German,
Spanish, French, Italian, and Japanese. Follow the installer prompts.
NOTE: Other language packs are available from Microsoft’s website.
7. After exiting the Control Panel, click the oscilloscope icon in the
lower-right corner of the desktop to maximize the oscilloscope display.
Open decode software if an option is installed.