Teledyne LeCroy LabMaster 10Zi Rackmount - Manual (Page 7)

Assembly Instructions
Rack Mount Part Table
These parts are provided with the LabMaster 10Zi Rack Mount kit. Use these part numbers (P/N) when ordering replacement parts.
MCMZi Control Module
Description Teledyne LeCroy P/N QTY
8-32 Undercut Flat Head Screw 42A0000000969 4
3/8 Offset Handle 42A0000000989 2
Torx Driver T10 42A0000001072 1
T Handle Torx Driver T25 42A0000001774 1
2.5mm T-handled 9" long Allen key (2.5mm Hex T-Wrench 9in) 42A0000001038 1
Rack Mount Bracket Left 923700-00 1
Rack Mount Bracket Right 923699-00 1
Screw M3x0.5 10mm Clear T-10 916084-00 6
LM10Zi Acqusition Module
Description Teledyne LeCroy P/N QTY
Rack Mount Tray 923513-00 1
© 2013 Teledyne LeCroy, Inc. All rights reserved.
LabMaster and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Other product or brand names are trademarks or requested
trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications are subject to
change without notice.
December 2013
7