Teledyne LeCroy LabMaster 10Zi Rackmount - Manual (Page 2)

LabMaster 10Zi Rack Mount
Remove Covers
Prepare the MCMZi for rack mounting by removing the outer plastic covers, handle and metal wrap. "Left" and "right" refer to your left
and right when facing the front of the unit.
1. Remove the five M3 X 6 Torx screws on the top of the unit using the T10 Torx driver, and take off the top cover.
2. Remove the three long M3 X 10 and six short M3 X 6 screws on the left side using the T10 Torx driver, and take off the cover.
3. Remove the two long M3 X 10 and six short M3 X 6 screws on the right side using the T10 Torx driver, and take off the cover.
4. Remove the five M5 X 12 screws that attach the handle to the left side using the T25 T-handled Torx Driver, and take off the
handle.
2 923719-00 Rev A