Teledyne LeCroy USB2-GPIB - Manual (Page 9)

7 923571-00 Rev A
USB2-GPIB Specifications
Item Specifications
Power feed Bus-powered
USB standard Conforms to USB Specification Revision 2.0
USB connector Type A
GPIB connector Amphenol 24-pin (male)
Power consumption 350mA at the maximum (during operation)
Temperature, operating 5° to +40°C
Temperature, storage -40° to +71°C
Humidity, operating
≤ 80% RH (non-condensing)
Altitude, operating 3048 m (10,000 ft) max at ≤ 25°C
External dimensions 61 (W) × 22 (H) × 113 (L) (mm)
Cable length 750 (mm)
Mass Approx. 140 g
Notes:
• The source voltage is supplied from the USB port.
• The appearance or parts of the specifications subject to change without
prior notice.
• GPIB driver needs to be properly configured to allow HS488 high speed mode,
including proper definition of the cable length.