Teledyne LeCroy USB2-GPIB - Manual (Page 5)

3 923571-00 Rev A
How to Use the USB2-GPIB
(a) Connection
As shown in Figure 1 below, insert the USB connector into the USB port of
the oscilloscope, then attach the IEEE-488/GPIB connector to the PC.
During the first use of the adaptor, Windows will install the device driver.
You may need to restart the oscilloscope for the adaptor to be functional.
Figure 1 Connection Diagram of GPIB Control
WaveRunner
WaveSurfer
PC
USB2-GPIB
GP-IB
connector
USB
port