System Sensor FAAST Configuration and Validation Process - Manual (Page 3)

Product specifications subject to change without notice. 3
Customer Name:
Project Name:
Site Address:
Installer Name/Contact information: Date:
Testing Agent/Contact information: Date:
Client Representative/Contact information: Date:
Witness/Contact information: Date:
Wiring Checked: Date: Yes / No
Detector Settings Checked: Date: Yes / No
Test Relays: Date: Yes / No
RequIReD DocumenTS
Copy of Detector Validation Form Yes / No
FAAST system Bill of Material Yes / No
Commissioning Form for each FAAST device Yes / No
FAAST Layout Report Yes / No
Smoke Test results (optional) Yes / No
Locally required forms Yes / No
Customer’s Signature: Date:
Testing Agent Signature: Date:
FAAST Device (Air Sampling-Type Detector) Validation Form
SPecIFIcATIonS
Application (circle one): Conditions:
Open Area Under Floor
Cold Area High Air Exchange Temperature:
In-Duct – Capillary Standard Humidity:
Number of Sample Points: Other:
As-Built Installation
Drawings Available?
Yes / No
Is the system installed in
accordance with the design?
Yes / No
Is the power supply
installed properly?
Yes / No
Is the pipe network installed
and labeled properly?
Yes / No
Describe any Variations:
Sensitivity: % Obscuration/ft.:
Detector Address: