ADTRAN Ethernet Over Bonded Copper MX3112 - Manual (Page 2)

Ethernet over Bonded Copper
Specifications are subject to change without notice. ADTRAN is a registered
trademark of ADTRAN, Inc. All other registered trademarks and trademarks men-
tioned in this publication are the property of their respective owners.
Product Specifications
Front Panel Features
■ Controller module: Activity, Alarm, DS3 Status,
DSX-1/E1 Status, DSX-1/E1 Test, and Ethernet 1-4
LEDs
■ Alarm cut-off button
Interfaces
T3 Interface
■ Channelized DS3
■ Line build out: No adjustments required 0 to 450 feet
■ Framing format: M13 and C-bit parity
■ Line rate: 44.736 Mbps
■ Line interface: Dual 75 ohm BNC coax female
connectors
10/100Base-T Ethernet Interface(s)
■ IEEE 802.3
DSX-1 Interface(s)
■ Line build out: 0 to 655 feet
■ Line rate: 1.544 Mbps
■ Line code: AMI or B8ZS
■ Line interface(s): Dual 64-pin champ connectors
E1 Interface(s)
■ Line build out: 0 to 655 feet
■ Line rate: 2.048 Mbps
■ Line code: HDB3
■ Line interface(s): Dual 64-pin champ connectors
Diagnostics
DS3 Network
■ ANSI T1.107 compatible loopbacks
■ Line loopbacks
DSX-1 Ports
■ Local and network loopbacks
■ CSU and NIU loopbacks
Mechanical
■ Dimensions: 1.7H X 8.6D X 17W (in.)
44H x 218D x 435W (mm)
■ Weight: 5.5 lbs (2.5 kg)
– for a fully redundant configuration
Clocking
DS3 Network
■ Network: Receive from DS3 network
■ Local: Internally generated
Bonded DS1s
■ Line: Referenced from selected DS1
■ Local: Internally generated
■ Loop: Receive from DS1
MX3112
Alarms
■ External alarm contacts
■ Normally open pinout
■ Front panel alarm cutoff switch
Electrical
■ Power: ±24 VDC or -48 VDC, 36 W
Regulatory Standards
■ NEBS Level 3
■ UL 60950 and ETL
■ IEC/EN 60950 RoHS compliance
Management
VT100 Terminal Interface
■ EIA-232 compatible, female DB-9 adapter
MX3 4-Port 10/100Base-T Ethernet Module
■ 4-Port Ethernet Module
■ Deployed with redundant or non-redundant MX3112
Controller Cards
■ Interfaces the MX3112 Controller Card with the four
client 10/100Base-T signals
■ The four Ethernet ports located on the MX3ETH4
Module provide the protection and physical interface
for the MX3112 Controller Card
■ The ports can be accessed using standard CAT 5
cable with an RJ-45 connector
Environmental
■ Operating temperature: -40°C to 65°C
■ Storage temperature: -40°C to 85°C
■ Relative humidity: GR-63-CORE
Product Includes
■ Mounting ears for 19-in. and 23-in. racks
Ordering Information
Equipment Part #
MX3 Chassis 1189001L1
MX3 Fan Module * 1189007L1
MX3112 Controller 1189901L1
MXETH4 1189902L1
* Fan Module Required
6118990xLx-8C April 2007
Copyright©2007 ADTRAN, Inc.
All rights reserved.
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
877 457 5007 fax back
General Information
800 9ADTRAN
[email protected]
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
[email protected]
www.adtran.com/support
Where to Buy
800 827 0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726 8663
[email protected]
www.adtran.com/support
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
International Inquiries
+1 256 963 8716 voice
+1 256 963 6300 fax
[email protected]
www.adtran.com/international
ADTRAN is an ISO 9001, ISO 14001
and a TL 9000 certified supplier