Steelcraft Automotive 71010 BULL BAR - Manual

STEELCRAFT
INSTALLATION INSTRUCTIONS
BULL BAR PART # 71010
99-04 FORD SUPER DUTY 2/4WD - 00-04 FORD ESCURSION 2/4W
PARTS LIST:
2- FRAME BRACKETS
4- 3/8 x 1 SOCKET HEAD
4- 3/8 HEX NUTS 4- 3/8 LOCK WASHERS 4-3/8 WASHERS
1. LOCATE AND REMOVE FRONT BUMPER BOLTS THAT SUPPORT THE BUMPER TO VEHICLE. ( IT MAY BE
NECESSARY TO HOLD THE FACTORY NUT PLATE FROM THE REAR OF THE BUMPER TO KEEP IT IN PLACE )
ATTACH BRACKETS TO BUMPER AND REINTALL BOLTS. HAND TIGHTEN.
2. ATTACH BULL BAR TO BRACKET USING 3/8 FASTENERS AS SHOWN. HAND TIGHTEN.
3. LEVEL AND ADJUST BUL BAR AS DESIRED AND TIGHTEN ALL FASTENERS.