Staub Electronics EA-MINI-2D-35 EPISODE - 2 CHANNEL 35 WATTS DIGITAL MINI-AMPLIFIER - Manual (Page 15)

www.snapav.com Support: 866.838.5052
EA-MINI-XD-35 Installation Manual
Pg. 15
12. Sound Calibration
12.1. HIGH PASS 60Hz / FULL Dip Switch
12.2. Audio Settings
The EA-MINI-XD-35 features built-in digital sound processing to allow for the dealer or end user to fine-tune
settings such as balance, subwoofer volume, and treble and bass equalization. Additionally, there are three
preset options optimized for movie, music, and vocal audio.
To change DSP settings, use the accessory remote or a programmed universal remote. The commands for
DSP cannot be set up via IR learning.
This switch controls the output frequency of the speaker level outputs. Set the high pass filter switch to the
down position to protect both the amplifier and the speakers it is powering if smaller speakers are used or if
a subwoofer is used.
Position Frequency Mode
Up Full frequency audio to speakers
Down Frequencies < 60Hz not routed through speakers
1. Music Mode
Preset bass and treble levels, optimized for playing music, movies,
or vocal audio.
2. Movie Mode
3. Voice Mode
4. Space Enhancement Preset levels optimized for use in large or noisy spaces.
5. Treble
Bass and treble levels can be set discretely to flat or customized as
needed.
6. Bass
7. Balance
Left and right channel balance can be changed as much as needed,
or be set discretely to center.
8. Subwoofer
Subwoofer volume can be adjusted as needed. (Set crossover levels
using the powered subwoofer amplifier.)
1 2 3 4 5
SWITCHES
1 2 3 4 5
SWITCHES