Staub Electronics EA-MR-SSVC-6 EPISODE - 6 ZONE SPEAKER SELECTOR W_VC - Manual

OWNER’S MANUAL >>
EA-MR-SSVC-6
Lifetime Limited Warranty
All Episode Speakers Selectors have a Lifetime Limited Warranty. This warranty includes parts and labor
repairs on all components found to be defective in material or workmanship under normal conditions of
use. This warranty shall not apply to products which have been abused, modified or disassembled.
Products to be repaired under this warranty must be returned to SnapAV or a designated service
center with prior notification and an assigned return authorization number (RA).
SPECIFICATIONS
Overall Dimensions
2-1/8˝ (54mm) H x 16-3/4˝ (425mm) W x 10-1/4˝ (260mm) D
(Depth includes speaker connectors & volume control knobs;
height includes feet)
Maximum Number of
Speaker Connections
6 pairs @ 4 ohm minimum
Minimum Amplifier
Impedance with All Rooms
Selected at Full Volume Each
5.3 ohm w/ 8 ohm speakers connected, 4.6 ohm w/ 4 ohm
speakers connected
Power Handling 100 W/CH continuous, 200 W/CH Music Power (Peak)
Weight 11 lbs
Connection Type
Removable screw-down connectors, hot-stamped with left and right
polarity, accepts 12 AWG to 18 AWG speaker wire. 16AWG recommended
Lifetime
Speaker Selector
100917
SETTING THE EA-MR-SSVC-6 VOLUME CONTROLS
This procedure will allow you to properly set the volume of your system to avoid overdriving
the EA-MR-SSVC-6 and/or any connected speakers, and to avoid damage or amplifier distortion (clipping).
1. Set receiver’s volume control to the minimum setting.
2. Turn each volume control on the EA-MR-SSVC-6 to its maximum setting.
3. Slowly turn the volume up on the receiver until the best maximum volume without distortion
is achieved. Volume can be individually adjusted in any zone that’s connected to the EA-MR-SSVC-6.
4. The volume of each room can now be individually attenuated to achieve the proper listening
level in each room.