Arcam FMJ AVR600 - Manual (Page 6)

E-4
The AVR600 receiver is designed to produce a level of
performance that will truly bring music and movies
to life.
The AVR600 is a high-quality and high-performance
home-cinema processor and amplifier built to Arcam’s
quality design and manufacturing standards. It
combines digital processing with high-performance
audio and video components to bring you an unrivalled
home-entertainment centre.
The AVR600 allows switching and control of eight
analogue and seven digital sources in addition to
internal AM, FM and DAB radio or a SiriusConnect™
Home Tuner input – as well as networked and USB
audio sources – making it an ideal hub for both home-
cinema and two-channel stereo systems.
Since many of these source components are also capable
of generating video signals, the AVR600 includes
broadcast-quality switching for HDMI, Composite,
S-Video, RGB and Component video signals. There are
audio and video outputs for PVR and VCR recording,
as well as two digital outputs for digital recording of
digitised audio sources. DVD-Audio and SACD can
be connected via the multi-channel input. Control of
the AVR600 is either by front panel control buttons, IR
remote control or RS232 port.
The CR102 remote control supplied with the AVR600
is an eight-device ‘universal’ learning remote control
which is simple to use, and once set up is able to control
a complete system. It can be programmed using its vast
internal code library to control CD and DVD players,
PVRs, TVs and other devices.
The installation of the AVR600 in a listening room
is an important process which requires care at every
stage. For this reason, the installation information is
very comprehensive and should be followed carefully to
achieve an unrivalled level of performance.
before you
begin…
�������������
���� ���� ������� ������ ���� ���� �� ������������������� ���� ����������������
�����
������
� � � � � � � � � � � � �
������ ���