Arcam FMJ AVR600 - Manual (Page 49)

E-47
English
external
amplifiers
analogue pre-amplifier outputs
All pre-amplifier analogue outputs are buffered, have
a low output impedance and are at line level. They are
able to drive long cables or several inputs in parallel if
required.
R, L, C
Connect these to the equivalent (Right, Left and Centre)
front channels of your power amplifier.
SW1
Main subwoofer output. Connect this to the input of
your active subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer 3 auxiliary outputs. These
are equivalent to SW1 but they allow the use of multiple
subwoofers.
SR, SL
Surround Right and Surround Left outputs. Connect
these to the Surround Right and Left power amplifier
inputs.
SBR, SBL
Surround Back Right and Surround Back Left outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Left power amplifier inputs.
For 6.1 channel speaker configurations, connect the
single Surround Back power amplifier to the SBL output.
��
��
�
�
���
���
��
���
��
�
��� ���
�
�
�
���
��
���
�����
�
��
�