Other connectors, Data connectors, Network connectors – Arcam FMJ AVR600 User Manual

Page 18: Usb connector, E-16, Rlead/rdock, Rs232 serial connector, Ethernet

E-16

other

connectors

data connectors

rLead/rdock

For use with an Arcam rLead or

rDock accessory. See page 13 and

the accessory documentation for

details.

RS232 serial connector

Use with control devices having

an RS232 serial port (for example,

Crestron and AMX touch screen

controllers). This connection

is also used for upgrading the

AVR600’s internal software.

network connectors

This section deals with installation of the unit into an

existing home network. For information on how to use

the AVR600’s network features, the USB socket, and for

a list of supported file types, refer to page 46.
Networking is a large subject and only the briefest

guidelines are presented in this handbook. Please

contact your Arcam dealer or specialist installer for

more information about introducing the AVR600 into

your computer network.

Ethernet

If an Ethernet cable is connected, the AVR600 will

automatically attempt to connect to your network.
You should use CAT5 cable plugged into the RJ45 socket

labelled

EThERnET

on the rear panel.

If your network uses static IP

addressing rather than DHCP,

you will need to provide any

gateway, DNS and proxy

information. See page 39 for

information on setting up the

network.

USb connector

The AVR600 can play files stored

on a USB mass storage device,

typically a pen drive, but any

USB device that complies with

the ‘mass storage device‘ class is

compatible.
The AVR600 only supports the

direct connection of USB devices

and will not support devices

connected through a hub. If

regular access to the

uSB

socket is required, you may

find it convenient to use a USB extension lead.
See page 46 for details of supported file types.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

��

��

�