Upgrade firmware, Backup/ retrieve settings – LevelOne WAB-6120 User Manual
Page 50
Chapter 5 Management Page 40
The password is case-sensitive and its length can not be exceed 19 characters!
Upgrade Firmware
Open “Firmware Upload” in “Management” and follow the steps below to upgrade firmware locally or
remotely through LEVELONE 150MBPS WIRELESS POE AP’s Web:
Figure 34 Upgrade Firmware
Click “Browse” to select the firmware file you would like to load;
Click “Upload” to start the upload process;
Wait a moment, the system will reboot after successful upgrade.
Do NOT cut the power off during upgrade, otherwise the system may crash!
Backup/ Retrieve Settings
It is strongly recommended you back up configuration information in case of something unexpected. If
tragedy hits your device, you may have an access to restore the important files by the backup. All these
can be done by the local or remote computer.
Open “Configuration File” in “Management” as below:
Note:
Note: