LevelOne WAB-6120 - Manual (Page 49)

Chapter 5 Management Page 39
password are allowed to access the LEVELONE 150MBPS WIRELESS POE AP.
Confirm Password
Input that password again to make sure it is your desired one.
Access Type
Select “Read Only” or “Read and Write” accordingly.
Authentication Protocol
Select an authentication algorithm. SHA authentication is stronger than MD5 but is slower.
Privacy Protocol
Specify the encryption method for SNMP communication. None and DES are available.
None: No encryption is applied.
DES: Data Encryption Standard, it applies a 58-bit key to each 64-bit block of data.
Password
From “Password Settings” in “Management”, you can change the password to manage your
LEVELONE 150MBPS WIRELESS POE AP.
Enter the new password respectively in “New Password” and “Confirm Password” fields; click “Apply”
to save settings.
Figure 33 Password