LevelOne FCS-1101 User Manual
Page 69
66
Alarm Buffer
You can set the Pre-alarm image and audio (the image and audio before the alarm
detection) and the Post - alarm image and audio. These can be set when Alarm sending
FTP client setting menu or Image memory setting menu is set to On, and besides when
Use alarm buffer is selected.
Setting
Alarm buffer：To activate the Alarm buffer function, select On. The basic setting options are
displayed below. When you do not use the Alarm output function, select Off.
Recording capacity
Pre-alarm period：Display the maximum recording capacity of image/audio before the
alarm detection.
Post-alarm period：Display the maximum recording capacity of image/audio after the alarm
detection.
Recording time
Set the recording time for the Pre-alarm image/audio and Post alarm image/audio.
Pre alarm period：Type it with recording time of the image/audio before the alarm
detection.
Post alarm period：Type it with recording time of the image/audio after the alarm detection.
Note
：