LevelOne FCS-1101 - Manual (Page 25)

22
User
The Network Camera default account and password setting is “root/MAC address of IP
camera (in capital letters)”. IP CamLocator provides to assign a password if the Network
Camera is intended to be accessed by others. Use this menu to set the username and
password of Administrator and up to 9 different users (User 1 to User 9), and the
authentication access right of each group.
Username：Set a user name between 5 and 16 characters.
Password：Set a password between 5 and 16 characters.
Confirm：Re-type the password to confirm.
Mode：Set a user to Admin, Operator or Viewer mode.
Viewer authentication：Allows any viewer direct access to Live View.