LevelOne FCS-1101 - Manual (Page 34)

31
How to Access to the Network Camera
This chapter introduces how to monitor the image from the device using Microsoft web
browser. The LevelOne IP camera can be used with Microsoft web browsers and Intelligent
IP CamLocator in Windows operation systems. This document focuses on introducing you to
Microsoft web browser. The recommended browser for Windows is Internet Explorer 6.0. If
you want to know how to use LevelOne IP camera with Intelligent IP CamLocator, check
Intelligent IP CamLocator User’s Manual in Windows operation systems.
The functions of the device should be set by the Administrator. For further instructions on
setting the device, see “Setting the Camera”.
Initial accessing the IP camera
1. Start your web browser, and enter the IP address or host name of the LEVELONE IP
camera in the Location / Address field of your browser.
Note ：
• If you only want to view the video without setting page, enter “http:///index2.htm” as
your web URL.
2. Use the default account “root” and default password is MAC address in capital letter.
Note ：
• The default user name “root” and the password are set at the factory for the administrator.
You can change them in the Account Menu under Setting.