LevelOne FCS-1101 User Manual

Page 58

Passive mode：Set whether you use the passive mode of FTP server or not when connecting

to FTP server. Select On to connect to FTP server using the passive mode.

Attached file type：Set attached file type to MJPEG or MPEG.4

Alarm sending

Set to forward the image and audio file to the specified FTP server linked with the alarm

detection by the external sensor input or by the built-in motion detection function. Select On

to send the image and audio file to FTP server linked with the alarm detection.

Remote path：Type the path to the destination in FTP server up to 64 characters.

Image file name：Type the file name you want to assign to the images when sending to the

FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for

naming.

Suffix：Select a suffix to add to the file name:

Date & time: The date & time suffix is added to the Image file name. The date/time suffix

consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),

minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number is

added to the file name.

Sequence number: A consecutive number of 10 digits between 0000000001 and

4294967295 and two fixed digits 00 is added to the Image file name.

Motion Detection：Click it on for using Motion Detection function as a sensor. You can set the

motion detection function page.

Note

：

• Motion Detection works only when the Video mode is set to MPEG4 and the Cropping is set

to Off.