LevelOne FCS-1101 User Manual
Page 29
26
PPPoE
Use this when you connect the camera through PPPoE (Point -to- Point Protocol over
Ethernet). PPPoE connection is the protocol that is widely used in xDSL (digital affiliate line
such as ADSL, VDSL or SDSL) as the authentication and connection system.
IP Address：The IP address obtained at the PPPoE connecting with network.
User ID：Enter the user ID for authentication necessary for PPPoE connections. Type it up to
64 characters.
Password：Enter the password for authentication necessary for PPPoE connections. Type it
up to 32 characters.
Confirm：Re-type the password to confirm.
Obtain DNS server automatically ： Select this to obtain the address of DNS server
automatically.
Use the following DNS server：Select this when you set the fixed address as the IP address
of DNS server.
Primary DNS：Enter the IP address of the primary DNS server.
Secondary DNS：Enter the IP address of the secondary DNS server.