Uts power connectors, Connect power to the uts – APC UTS6BI User Manual
Page 17
Site Preparation & Installation Guide Universal Transfer Switch UTS6 UTS6H UTS6BI UTS10BI
16
UTS Power Connectors
The power connectors are located on the front of the UTS.
Connect Power to the UTS
Verify circuit connections
1. Reconnect power to the circuit breaker panel and switch ON all of the circuit breakers.
2. Confirm the following:
a. UTS6/UTS6H - confirm that the circuits supporting the UTS circuits 5 and 6 are switched ON
b. UTS6BI - confirm that the 2-pole circuit supporting the UTS circuits 5 and 6 is switched ON
c. UTS10BI - confirm that the 2-pole circuit supporting the UTS circuits 9 and 10 is switched ON
Connect the UTS power cord to utility power
When the UTS is connected to utility power these two messages appear on the LCD
screen and the Utility Source LED will illuminate.
UTS10BI
UTS UNIVERSAL
TRANSFER SWITCH
APC - LEGENDARY
RELIABILITY