ADC Modem MM701G - Manual (Page 42)

Managing DSL
36 MM701G User Manual
2 View the statistics.
Parameter Description
Operational State Valid entries are:
• Handshaking is when the modem is making an attempt to
connect to a device on the other side of the G.shdsl line.
• Training is when the modem is learning the connection
parameters.
• Show Time is the actual connection time.
Data Rate Bit rate after the ATM headers have been removed.
DSP Version The modem DSP code can be upgraded—this is the current
version that is running on your system.
Last Failed Displays the last state reached before start-up failed. This is used
for troubleshooting by technicians.
Remote Coefficient A Displays the remote coefficient for channel A.
Remote Coefficient B Displays the remote coefficient for channel B.
Transmission Power Displays the local transmission power in dB.
Receiver Gain Displays the amplifying factor for incoming signal in dB.
Local SNR Margin Actual value of the current Signal to Noise (SNA) ratio.
Framer Sync Displays the link status.