ADC Modem MM701G - Manual (Page 61)

Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701G User Manual 55
4 View the statistics.
Parameter Description
OperationalState Valid entries are:
• Handshaking is when the modem is making an attempt to
connect to a device on the other side of the G.shdsl line.
• Training is when the modem is learning the connection
parameters.
• Show Time is the actual connection time.
DataRate Bit rate after the ATM headers have been removed.
DSPVersion The modem DSP code can be upgraded—this is the current
version that is running on your system.
LastFailed Displays the last state reached before start-up failed. This is used
for troubleshooting by technicians.
RemoteEncoderCoeffA Displays the remote coefficient for channel A.
RemoteEncoderCoeffB Displays the remote coefficient for channel B.
TransmissionPower Displays the local transmission power in dB.
ReceiverGain Displays the amplifying factor for incoming signal in dB.
Local SNRMargin Actual value of the current Signal to Noise (SNA) ratio.
FramerSync Displays the link status.