KB Electronics KBSI-240D KBSI Signal Isolator - Manual (Page 3)

1
This product complies with all CE directives pertinent at the time of manufacture. Contact
factory for detailed installation instructions and Declaration of Conformity.
i. SAFETY WARNING! Please read carefully:
This product should be installed and serviced by a qualified technician, electrician, or electrical
maintenance person familiar with its operation and the hazards involved. Proper installation, which
includes electrical connections, mounting and adequate enclosure, fusing or other current protec-
tion, and grounding can reduce the chance of electrical shocks, and/or fires in this product or
products used with this product, such as electric motors, switches, coils, solenoids, and/or relays.
Do not use this drive in an explosion-proof application. Eye protection must be worn and insulat-
ed adjustment tools must be used when working with drive under power. This product is con-
structed of materials (plastics, metals, carbon, silicon, etc.) which may be a potential hazard.
Proper shielding, grounding, and filtering of this product can reduce the emission of radio frequen-
cy interference (RFI) which may adversely affect sensitive electronic equipment. The input circuits
of this drive may not be isolated from the AC line. Be sure to read and follow all instructions care-
fully. Fire and/or electrocution can result due to improper use of this product. The drive may con-
tain electronic start/stop circuits, which are used for "Start" and "Stop" functions. However, these
circuits are never to be used as safety disconnects since they are not fail-safe. Use only the AC
line for this purpose.It is the responsibility of the equipment manufacturer and individual installer
to supply this Safety Warning to the ultimate end user of this product. (SW 7/2009)
!