Inter-M HDCC-400 - Manual (Page 29)

5. How to PC DVR Remote setup
A. If selects Setup on main menu, the below screen will be appeared.
B. After selecting System and checking Remote control box, please install as below to select
Setup remote control. Device ID is not allowed number “0”.
C. Make sure if any change is appeared on screen to press QUAD (Next Screen) button of a
controller for basic testing. If there’s no change appeared, check cable connection and
installation again.
Port : COM2
Baud Rate : 9600
Date
: 8
Parity : None
Stop Bit : 1
Device ID : XX