Inter-M HDCC-400 - Manual (Page 25)

Chapter 5 — Install with DVR Series
5.1 Install with Standalone DVR Series
When user wants to connect with DVR, proceed as the following order.
1. Connect RS232 cable between RS-232 Port of DVR and RS232 of the Keyboard.
(This connection enables DVR control remotely from KBD controller)
2. How to setup the KBD controller.
A. Turn the Keyboard ON
B. Input password (Factory setting is 9 9 9 9 )
C. Open the menu of the KBD controller by pressing CTRL + MENU Key.
D. Set as below in Network menu.
3. How to setup DVR
Set Baud Rate
DOME1 : 9600
DOME2 : 9600
RS232 : 9600
Com Ports
DOME1 : Dome
DOME2 : AUX IN
RS232
: DVR1-DVR4