Inter-M HDCC-400 User Manual
Page 26
A. Press “OK”, and the below screen will be appeared.
B. Select “System Information” on the system menu and change UNIT ID.
C. Select “Camera” on the Device menu. Unit ID should be 1 up to 99. Unit ID is not allowed
number “0”.
D. Set “PTZ Device” and “ID” of the dome camera. Select RS232/RS485 after PTZ is installed,
and then set-up as below table.
RS232/RS485
Baud Rate
Parity
Data
Stop
Usage
RS232
9600
None
8
1
Remote Control
RS485
9600
None
8
1
PTZ Control