Inter-M PAC-5000 - Manual (Page 34)

DIGITAL PA COMBINATION SYSTEM
32 PAC-5000
ƒU When press the playback/pause( ▶II) button, it converts into the COPY range setting mode, whose
setting method is same as CD COPY function.
ƒU When press the playback/pause( ▶II) button, it starts copying, and when it will have finished to copy,
it will convert into Stand-by mode automatically.
ƒU By pressing MEDIA FUN. Button, convert into the DRP mode, whose copied contents can be confirmed then.
ƒU When press Stop ( ) button during copying, it cancels the mode and stores tracks that have been
completed to playback until then in the corresponding memory.
※ Caution : 1) Since it outputs signals during running CD COPY, minimize a volume of the output
amplifier when you desire to copy only. (It does not produce an output when copying
between USB and DRP.)
2) If it lacks a memory capacity during running COPY, on the display window blinks
“MEMORY FULL”.
For such case, delete unnecessary files using DELETE function and then run it again.
3) It copies a file with MP3 type. And when a file with WMA type is copied, it is copied
with MP3 type requiring about 2 times of memory capacity. Therefore, you must
confirm a remaining memory capacity then.
7) DELETE
It is the function to delete unnecessary files stored in the internal memory(DRP) or USB memory.
- Partially delete
ƒU By pressing MEDIA button, select a mode (DRP or USB) where files to be deleted are stored.
ƒU When press DELETE button, it converts into the delete mode and then on the display window blinks “TRACK?”.
ƒU When press ▶▶ (SEARCH UP) button, on the display window blinks the starting region the be deleted.
ƒU Using I ◀◀ / ▶▶I or numerals button, input the tracks of the starting region.
Displace it using ▶▶ button, and input the end track of delete range using I◀◀ / ▶▶I or numerals(0~9) buttons.
➡
PAC5000_E 2008.7.1 5:59 PM 페이지 35