beautypg.com

Quick start guide for tempo hd (windows version) – Sonnet Technologies Tempo HD (With or Without Drive) Windows Version User Manual

Page 5

background image

Quick Start Guide for Tempo HD (Windows Version)

3

Windows 2000 Driver Installation

This section describes the installation of drivers to support the Tempo HD in
systems running Windows 2000. If your system is running Windows 98SE or
Windows Me, go back to “Windows 98SE and Windows Me Driver Installation”
on page 2. If your system is running Windows XP, skip to “Windows XP Driver
Installation” below.

1. Turn on your computer; during Windows startup, the New Hardware Found

window will briefly appear, with Mass Storage Device listed as the new hard-
ware type.

2. When the Found New Hardware Wizard window appears, click Next.

3. When the Install Hardware Device Drivers window appears, select “Search for a

suitable driver for my device (recommended),” and then click Next.

4. When the Locate Driver Files window appears, insert the Tempo HD Windows

Driver diskette into your floppy drive.

5. Select Floppy disk drives under Optional search locations and then click Next; a

new window will appear.

6. Type A:\Win2000, and then click OK.

7. When the Driver Files Search Results window appears, click Next.

8. When the Digital Signature Not Found window appears, click Yes; the appro-

priate driver will be installed.

9. When the Completing the Found New Hardware Wizard window appears, click

Finish; you must now format the attached drive. Skip to “Drive Formatting—
Windows 2000 and Windows XP” on page 7.

Windows XP Driver Installation

This section describes the installation of drivers to support the Tempo HD in
systems running Windows XP. If your system is running Windows 98SE or
Windows Me, go back to “Windows 98SE and Windows Me Driver Installation”
on page 2. If your system is running Windows 2000, go back to “Windows 2000
Driver Installation” above.

1. Turn on your computer; during Windows startup, a New Hardware Found

pop-up will briefly appear, with Mass Storage Device listed as the new hard-
ware type.

2. When the Found New Hardware Wizard window appears, insert the Tempo

HD Driver diskette into your floppy drive. Select “Install from a specific loca-
tion (Advanced),” and then click Next.

3. When the next window appears asking you to choose your search and instal-

lation options, select “Search for the best drivers in these locations,” and
“Search removable media (floppy, CD-ROM…,” and then click Next.

4. When the next window appears, select “WinXP Promise…,” and then click

Next.