Sonnet Technologies Tempo HD (With or Without Drive) Windows Version - Manual (Page 3)

TEMPO ™ HD
Integrated Hard Drive/PCI Card for Windows ® PCs
Quick Start Guide for Tempo HD
You Should Have
The following items should be included in your product package:
• Tempo HD Integrated Hard Drive/PCI Card
• Tempo HD Windows Driver diskette
The following items may be required for installation of the Tempo HD:
• Medium Phillips screwdriver
The following items may be required for installation of addi-
tional hard drives:
• Small flat blade screwdriver
• Needle nose pliers
Along with one or more available drive bays, the following items,
which are sold separately, may be required for installation of additional
hard drives:
• Ultra ATA cable
• Drive mounting brackets/carriers or drive mounting sleds
• Hard drive mounting screws
• One or more power cable Y-adapters
Hardware and Operating System Requirements
The Tempo HD requires the following in order to operate in your system:
• One available 2.1 PCI slot
• Pentium II (or equivalent) or higher
• Windows 98SE, Windows Me, Windows 2000, or Windows XP
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]
Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350
©2002 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc.Tempo HD includes technology by FirmTek, LLC.
Other product names are trademarks of their respective owners. All specifications subject to change without notice. Printed in the USA. QS-THD-W-XXXG-E-102402
. Support Note: We recommend that you make a backup of important
information on your system’s current hard drive(s) prior to installing new
hardware or software.
When handling computer products, you must take care to prevent components
from being damaged by static electricity. Before opening your computer or
removing parts from their packages, always ground yourself first by touching an
unpainted metal part of the computer, such as a port access cover, and work in
an area free of static electricity; avoid carpeted areas. Handle all electrical com-
ponents only by their edges, and avoid touching connector traces and compo-
nent pins.